SwedeSpeed - Volvo Performance Forum banner

1 - 20 of 22 Posts

·
Registered
Joined
·
415 Posts
Discussion Starter #1
Well, <P>I knew this time would come sooner or later and the time is now here. I am getting new wheels for my S40 so I am parting with the original Team Dynamics DTM's. <BR>I am selling all six (4 silver and two blue) for 100$ a piece, take them as a set. <BR>Or you can take four silvers for 125$ a piece. <BR>I also have four Yokohama Parada's with about 3k-5k miles left on them if you want them with the wheels I'll let them go for $25.00 each. If you buy all six wheels I'll throw them in for nothing. Two of the silver wheels have minor curb rash but nothing major, all siq wheels are true. Buyer pays shipping to anywhere in U.S. ONLY. <BR>Here are pictures of the wheels on the car; <BR> <IMG SRC="http://www.classiccats.cc/Images/S40Project/ipd2002/ipd3.jpg"> <BR>and<BR> <IMG SRC="http://www.classiccats.cc/Images/S40Project/seattle2002/seatacv.jpg"> <P>email me if interested
 

·
Premium Member
Joined
·
1,433 Posts
*drool*<P>I wish those were my bolt pattern. Fair price for those too...<P>Great job with the touring car paint scheme. That is the nicest S-40 I have seen yet. <P>
 

·
Premium Member
Joined
·
1,433 Posts
Hey what kind of spoiler is that on the back? It looks just like the BTCC spoilers on those Volvos. Like one for my 850.<BR>Thanks!<P>
 

·
Registered
Joined
·
415 Posts
Discussion Starter #4
Thanks Spearzy,<P><BR>The rear wing in an Erebuni type DTM/BTCC style. My shop carries those if interested, we're expecting our first bulk shipment in about three to four weeks.<P>2001 Volvo S40 BTCC<BR>"Drive Safely"<BR> <IMG SRC="http://www.s40concepts.net/kylie_image.jpg">
 

·
Registered
Joined
·
415 Posts
Discussion Starter #6
that's a secret for now, lots of neat surprises coming in the next month (hopefully no blown engines)<P>Carlos<P>2001 Volvo S40<BR>"Drive Safely"<BR> <IMG SRC="http://www.s40concepts.net/kylie_image.jpg">
 

·
Registered
Joined
·
2,331 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by cs40racing:<BR><B>...lots of neat surprises coming in the next month</B><HR></BLOCKQUOTE><P>T5 swap?<P>
 

·
Registered
Joined
·
415 Posts
Discussion Starter #9
No, they will only fit S/V40 series Volvo and a couple of other small imports with a 4 on 4.5" bolt pattern. <BR>HEY, what part of Houston are you in?<P>2001 Volvo S40 BTCC<BR>"Drive Safely"<BR> <IMG SRC="http://www.s40concepts.net/kylie_image.jpg"> <p>[This message has been edited by cs40racing (edited 07-02-2002).]
 

·
Registered
Joined
·
415 Posts
Discussion Starter #11
YEA,<P>Who doesn't know Richmond????<BR>I work off I10West and Beltway, <BR>check us out <A HREF="http://www.texasautomotiveperformance.com" TARGET=_blank>www.texasautomotiveperformance.com</A> <P>2001 Volvo S40 BTCC<BR>"Drive Safely"<BR> <IMG SRC="http://www.s40concepts.net/kylie_image.jpg">
 

·
Registered
Joined
·
135 Posts
Nice...Now I have a place that I can take my C70 other than dealership. Have you guy's ever tighten up screws for the dashboard. My 98 C70 dash squeeks way too much. It seems that it's gotten worse ever since I put IPD springs on it. If so what would you guy's charge?
 

·
Registered
Joined
·
415 Posts
Discussion Starter #13
Are you sure it's the dash that's loose?<BR>I can't really quote a price on that since we don't know what the problem is. That squeak could be concentrated in one area (if you understand what I mean), if could be as easy as slipping some foam to tighten up the space between the dash and plates it installs on or as hard as pulling everything apart and going berzerk.<P>Carlos<BR>2001 Volvo S40 BTCC<BR>"Drive Safely"<BR> <IMG SRC="http://www.s40concepts.net/kylie_image.jpg">
 

·
Registered
Joined
·
135 Posts
I'm pretty sure it's the dash because I have tighten the screws around the glovebox and the ones by the ashtray. It did some good but I didn't elimiate all the noise. When I press the dash in I can make the noise appear. If it would be putting some foam back there what would you guy's charge? I know it's hard to tell from just e-mails but if you could give me a rough estimate I would really appreciate it. Thanks<BR>-Dariel
 

·
Premium Member
Joined
·
1,433 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by cs40racing:<BR><B>Thanks Spearzy,<P><BR>The rear wing in an Erebuni type DTM/BTCC style. My shop carries those if interested, we're expecting our first bulk shipment in about three to four weeks.<P>2001 Volvo S40 BTCC<BR>"Drive Safely"<BR> <IMG SRC="http://www.s40concepts.net/kylie_image.jpg"> </B><HR></BLOCKQUOTE><P>Would the spoiler be wider on the 850 vs. the S40? I have not measured the width of my trunk yet but the spoiler should overhang about a 1" on each side right? If you wouldn't mind sending me some info (pricing, measurements) when you get in your shipment that would be most appreciative. Either post here for all or email me at [email protected]<P>I live in Canada but everywhere that sells spoilers seems to be from the US anyway so shipping cost isn't a major concern unless you already have authorized dealers here.<BR>Thanks,<BR>Spearzy<P>
 

·
Registered
Joined
·
415 Posts
Discussion Starter #16
Removing and replacing the dash runs about $400.00, this however does not garuantee the noise will go away.<P>Carlos<BR>2001 Volvo S40 BTCC<BR>"Drive Safely"<BR> <IMG SRC="http://www.s40concepts.net/kylie_image.jpg">
 

·
Premium Member
Joined
·
1,433 Posts
Would an IPD strut brace help that noise? It would take some of the flex out of the front of the car that is possibly contributing to the dash squeekes. If you do take apart the dash maybe some foam inserts may help to dampen/eliminate the noise...<BR> <A HREF="http://www.volvospeed.com/" TARGET=_blank>http://www.volvospeed.com/</A> <BR>under maintenance/repair and then dashboard removal shows a lot of attachment points that you missed. This shows an 850 dashboard but I think it should be similar. Try tightening the other screws shown in these pictures. Good Luck!<BR>
 

·
Registered
Joined
·
135 Posts
I have thought about the brace but just don't feel like droping some cash(200.00) for that at this time. But if I knew for sure that it would fix I would probably do it as the noise is driving me crazy! I have this awsome vehicle that sounds like it was put together like an old chevette. Only complaint I have on this vehicle.
 

·
Registered
Joined
·
33 Posts
still got the wheels? my fiance needs some for her newly acquired 240SX...<P> <IMG SRC="http://www.swedespeed.com/ubb/biggrin.gif">
 

·
Registered
Joined
·
415 Posts
Discussion Starter #20
wheels are gone, tires still available.<BR>Yokohama Parada 215/40-18 one set of four (4) with about 5k left on them.<BR>Take them for 100$ the set plus shipping.<P>2001 Volvo S40 BTCC<BR>"Drive Safely"<BR> <IMG SRC="http://www.s40concepts.net/kylie_image.jpg"> <p>[This message has been edited by cs40racing (edited 07-08-2002).]
 
1 - 20 of 22 Posts
Top