SwedeSpeed - Volvo Performance Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. R Forum (2004-2007)
    Just did iPd subframe bushing inserts on my R, about to do them on my grandpa’s t5m, do I really need new bolts? I understand it’s suggested but just wondering. Thanks for reading.
  2. S80 (1998-2006)
    Short background: Got myself a 2005 S80 T6 Premier w/4C and 160k miles about 6 months ago. The suspension on this car is on its last breath of life. I will be replacing the entire front strut assembly (minus the springs), the LCAs (all the bushings are shot), inner/outer tie rods, sway bar...
  3. V70 & V70XC & XC70 (2001-2007)
    I was told the subframe inserts from IPD are an easy way to improve handling so I bought some for my 07 XC70, went to install them yesterday after watching a couple of YouTube videos of people doing it. I was stumped to find that accessing my bushings was different than what I saw in videos...
  4. V70 & V70XC & XC70 (2001-2007)
    Hey guys, I'm installing Kaplhenke delring bushings and 1" CCP spacers on my 2003 XC70. The bolts that come with the spacers also don't have torque settings/numbers. I know the standard volvo setting is like 75ft lbs +120deg. Has anyone installed the spacers before and simply used a torque value...
  5. 850 (1993-1997)
    So I have to replace my subframe and before I just start taking **** off I would like to have a plan and procure the required tools if there is any special tools needed for the job. Before making this post I searched the forum to see if there were any subframe removal threads on my year (1997)...
  6. Want Ads
    So I'm willing to pay, need a subframe, I have not been able to locate one anywhere online. I slid on ice this morning and snapped control arm and the subframe got tweaked severely. It's kinda hard to see the twist in this picture, but you can see that this side of the frame is twisted. I'm...
1-6 of 6 Results
Top