SwedeSpeed - Volvo Performance Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. R Forum (2004-2007)
    I'm currently at a loss. A couple weeks ago I noticed when I would gas it there would be a slight hesitation as boost would build but would still boost all the way and hold it. Then that same day I was getting on freeway and gave it about 3/4 throttle and then boom no power right into limp mode...
  2. S60, S60CC & V60, V60CC (2011-2018)
    Hey everyone. This is my first post here and I already asked this to a smaller local Forum but they were just as clueless as me. So here goes sky second attempt in fixing this issue. First of all, my car: Model: S60 D5 AWD with R Design from 06/11 Engine: D5244T15 with 215HP...
  3. R Forum (2004-2007)
    Yesterday had cruise control on driving 60 on a country road, and while going uphill, car built revs then cruise control cut off harshly and the car ran very rough at 1100 rpm and no higher. Pulled over and cycled key and started in limp mode and has stayed there ever since. I did not make the...
  4. S40 & V50 (2005-2012)
    So I have a volvo v50 t5, since owning it's had a few issues, it's got pretty lumpy performance, feels like the revs fluctuate, I had a miss fire code pop up for cyl 2 and 4, but cleared and hasn't came back in a while, but I do get a low performance mode with no codes, t also if it helps...
  5. XC90 (2003 - 2014)
    Hey all, second post here. I recently went through a ton of electrical issues with my 04 xc90 T6 and after I figured out the issue I decided to change out my timing belt. I am very positive that I did the change correctly as I was detailed in making sure the marks were all lined up and there...
  6. S40 & V50 (2005-2012)
    Good day guys. I have a 2010 S40 Powershift 2.0 ,petrol engine. My problem is that when starting the car the temperature gauge rises to normal (12 o'clock position) almost immediately. It stays there fine after that. Is this normal? Secondly I now have an engine light coming on with code P2008...
1-6 of 6 Results
Top