Search Results for ‘engine build’

Hello all i'm looking to build my R for about 500ish awhp. I'm currently rocking completely stock car with tf-80sc auto transmission with pcv, timing refresh and stage 0. I'm planning on buying a separate block the same B5254T4 that comes stock in the car and using elevate sleeves some Wiseco...

This is a build thread for my s60 Started out in life as a 2002 2.4t lpt, i upped the boost without a tune which resulted in a spun bearing after detonation. I then bought a b5204t5 engine stripped it down and it looked almost new inside, clearly very well looked after i then started buying...

Hi i have a 2002 volvo V70 D5244T2 with an auto trans. But the car has gone over 570k Km And it has a lot of personal value for me. But im looking for a little bit more powa babeh. And im curious for the T5 engine with a little more power capability. I have been wondering if i can reuse my...

So whats the consensus around block guards for 83mm whiteblocks. Ive heard horror stories of hotspots causing piston failure and ive also heard great things about them. Anyone have any real world experiences running one? Or is swapping over to the 81mm a better option. Only reason im considering...

Well I have read the forums and whilst I see many posts with symptomatic issues I have not found a situation close enough to mine so here goes. 2015 S60 FWD I bought 8/2019 with 50k miles. Carfax was clean most of its service was done by Volvo dealers. I continued the Volvo dealer services for...

So I’ve finally made up my mind. Im gonna run a junkyard 81mm block with forged k1 rods and wiesco forged pistons. Im just gonna use my 4t4 for all the parts so i need to know what im gonna have to buy. So far i know i need rod/main bearings, gaskets, and studs. Is there anything else im gonna...

i wanted to run the crank off the stock 4t4 with k1 rods and stock pistons. I was wondering if this is possible and how much hp it can handle. Im gonna run a viva super hybrid k24 so im only gonna be making 400-450 whp. Do you guys think this is a good setup or if there is cheaper more...