SwedeSpeed - Volvo Performance Forum banner
1 - 10 of 10 Posts

Squelch

· Registered
Joined
·
1 Posts
Discussion starter · #1 ·
2016 Xc90 T6 Momentum, 140,000 miles. All coils and plugs replaced after misfire developed during cold temps..9 degrees. Now my foxwell scanner in live data mode shows Cylinder 1 is still having issues. Thinking about injector replacement but I haven't found any resources or tutorials for doing that job. Any advice would be great. Thanks in advance.
 
2016 Xc90 T6 Momentum, 140,000 miles. All coils and plugs replaced after misfire developed during cold temps..9 degrees. Now my foxwell scanner in live data mode shows Cylinder 1 is still having issues. Thinking about injector replacement but I haven't found any resources or tutorials for doing that job. Any advice would be great. Thanks in advance.
Swap coils around, see if the misfire moves.
 
Did you ever find anything on this issue. Same problem here. I moved spark plug and coil to cylinder 2 to see if that was the issue with no luck. Problem still exists in Cylinder 1. Thanks!!


Sent from my iPhone using Tapatalk
 
My 2016 had a leaking fuel injector - took the dealer forever to figure it out, but that was source of myriad of problems related to misfires.
 
Interesting.... having a Cylinder 1 misfire myself right now, code doesn't move when the coil or plug is moved. Swapping plugs soon, then will have to see what's up.
 
1 - 10 of 10 Posts